Techniques
How to Get Perfect Paint Lines Every Time: 5 Pro Tips for Clean Edges
Here are five science-backed tips to make your painting projects look like they were done by a pro.
How to Apply and Remove FrogTape
When using FrogTape® painter’s tape, there are a few easy tips you can follow to make sure you get sharp paint lines every time.
TO APPLY
- Step 1: Clean your surface. Make sure it’s dust-free or dry.
- Step 2: Apply your tape to the surface. For experienced painters, unroll the tape in one long section and keep the roll flat against the wall. For less experienced painters, apply the tape in shorter sections to avoid stretching the tape.
- Step 3: Eliminate gaps and seal edges. Go over the edge of the tape with a firm plastic tool like a putty knife or plastic card.
TO REMOVE
- Step 1: For best results, remove the tape while the paint is still wet for the best results.
- Step 2: Pull the tape off slowly at a 45-degree angle. If you hear ripping noises, it means you’re going too fast.
More ideas like this
-
-
Techniques
What Tape Is Safe to Use on Wallpaper?
When working on home improvement projects that involve wallpaper, protecting the surface is essential. Wallpaper can be delicate, and using the wrong kind of tape may lead to peeling, tearing or permanent damage. Here's how to choose the right tape and avoid costly mistakes.
-
Techniques
When Should You Use FrogTape® Delicate Surface Painter’s Tape?
Painting projects can be transformative, but only if you protect your surfaces properly. One of the most important decisions you’ll make before picking up a brush is choosing the right painter’s tape. If you're working with delicate surfaces, FrogTape® Delicate Surface Painter’s Tape might be your best ally.