
Inspiration
Long lasting hold
Featuring CleanGrip Technology™, FrogTape reMOVEables™ hold a variety of items and remove without a trace.
Supplies Needed
Step 1
Lightly sand the entire hutch with 220 grit sandpaper and then apply one coat of primer. After the primer dries, paint several coats of the base coat of paint. For this DIY paint project, KariAnne used Extra White SW 7006.
Next, plan out your pattern. KariAnne wanted the stripes to be uneven — some larger stripes and some smaller stripes instead of unified stripes.
Step 2
After the initial pattern and stripes are planned out, vertically tape off the rest of the piece. For this project, the stripes start on the back, top portion of the hutch and they continue down the front of the drawers and the paneled doors. Now it's time to paint! KariAnne used the following paint colors:
FINAL STEPS
Peel off the tape to reveal the crisp paint lines. Once dry, seal the entire piece with a coat of clear polyurethane — and you're all set!
Need more details and want to see all the tips and tricks for this DIY paint project? Check out the full DIY Patterned Hutch tutorial to find out more.
More ideas like this